Services & objectives
CEN Technical Standards
ISO Technical Standards
How to reach us
AMAPLAST desk abroad
An encouraging first quarter
14 July 2014
The analysis by Assocomaplast of the ISTAT figures for Italian foreign trade in the first quarter of this year in fact shows that exports are up by almost nine percentage points compared to January-March 2013.Extruders and blow moulding machines, to name just two of the most significant categories, showed especially strong growth.
10 July 2014
ACIMGA – the Italian Manufacturers Association of Machinery for the Graphic, Converting and Paper Industry – and ASSOCOMAPLAST have reached an operational agreement which includes sharing their premises as well as some of the services such as the technical and regulatory office, the economic studies department and the IT management.
Ready for Plastic Technologies Award 2015
2 July 2014
PROMAPLAST, organizer of PLAST (Rho, May 5-9 2015) international exhibition for the plastics and rubber industry, and POLI.design, consorzio del Politecnico di Milano, have launched the second edition of the international competition Plastic Technologies Award 2015.
Last term to apply at PLAST 2015 before stand allocation
1 July 2014
On Monday June 30, 2014 the second deadline to apply at PLAST 2015 and satellite-show RUBBER 2015 expired, with almost 1,000 exhibitors already applied (see the complete list
EUROMAP and SPI in favour of TTIP
23 June 2014
EUROMAP (Europe's Association for plastics and rubber machinery manufacturers) and SPI (The Plastics Industry Trade Association) have prepared the attached press release, which underlines the importance of the signature of TTIP (Transatlantic Trade and Investment Partnership), which effect on the trade of machines and equipment cannot be other than positive.
ASSOCOMAPLAST with CONFINDUSTRIA
20 June 2014
Giorgio Squinzi CONFINDUSTRIA President and Diana Bracco EXPO 2015 President and Commissioner of the Italian Pavilion signed yesterday in Rome the cooperation agreement for the participation of CONFINDUSTRIA at EXPO, with the support of 9 Associations and Federations among which ASSOCOMAPLAST.
19 June 2014
It is going on right now in Lyon at Eurexpo Fairground, the 12th edition of FIP (June 17/20). The exhibition covers around 19.000 net sqm, growing of 20% compared to the 2011 edition when the net area occupied was around 16.000 sqm. Also the number of exhibitors has increased, from 600 of 2011 to 700 this year.
19 June 2014
The fifteenth edition of ARGENPLAS has started on Monday June 16, on a net exhibition area strongly reduced compared to 2012, at the old Fairground of Costa Salguero.
Compression and transfer moulding machines
18 June 2014
CEN (European Committee for Standardization) has published the final version of EN 289:2014 concerning the safety requirements of compression and transfer moulding machines, which will come into force upon publication in the European Official Journal.
ASSOCOMAPLAST Members' Assembly
13 June 2014
Italian manufacturers in Buenos Aires
13 June 2014
From June 16 to 19, 2014, will be held the 15th edition of ARGENPLAS, the main trade exhibition of the sector in Argentina, organized by MBG & EVENTS with the support of CAIP (local Association of the plastics industry).
New ASSOCOMAPLAST Members
11 June 2014
On the occasion of its meeting on June 10, 2014 the Board of Directors of the Association accepted the application of the company MECA TECNO snc as Effective Members. Consequently, for the time being ASSOCOMAPLAST Members are 164.
Light and shade of PLASTPOL
4 June 2014
Undefined balance for the 18th edition of PLASTPOL 2014, which ended on Friday May 30 and whose visitors' flow appeared interesting only during the second day of the exhibition.
live from PLASTPOL
28 May 2014
It is going on right now in Kielce, the 18th edition of PLASTPOL (May 27-30, 2014). The exhibition covers around 13.700 net sqm, growing compared to the 2013 edition when the net area occupied was around 12.000 sqm. Also the number of exhibitors has increased, from 662 of 2013 to 744 this year.
Second term to apply at PLAST 2015
16 May 2014
On Thursday May 15, 2014, the first term expired in order to apply at PLAST 2015 and the satellite-show RUBBER 2015, with almost one thousand companies that already submitted their regular application, thus benefiting of discounted rates upon balance.
Last days for discounted rates at PLAST 2015
8 May 2014
New ASSOCOMAPLAST Members
30 April 2014
On the occasion of its meeting on April 29, 2014 the Board of Directors of the Association accepted the application of two new companies: COSTARELLI Off. Mecc. srl and OMMP-MOULDS srl as Effective Members. Consequently, for the time being ASSOCOMAPLAST Members are 163.
CHINAPLAS: more and more like K
23 April 2014
Almost 3,000 exhibitors (coming from around 40 countries) are attending the 28th edition of CHINAPLAS, just opened today in Shanghai.
PLAST 2015 exhibitors: an increasing trend
15 April 2014
Italian manufacturers in Shanghai
2 April 2014
At SNIEC (Shanghai New International Expo Centre, Pudong), from April 23 to 26, 2014, the 28th edition of CHINAPLAS shall take place, annual exhibition alternating with Guanghzou and main event for our industry in Asia. More than 50 Italian companies will be attending CHINAPLAS 2014 through the national pavilion coordinated by ASSOCOMAPLAST.
The sector is holding, in spite of everything
21 March 2014
New ASSOCOMAPLAST Members
28 February 2014
On the occasion of its meeting on February 27, 2014 the Board of Directors of the Association accepted the application of two new companies: SPM spa as Effective Member and HELIOS ITALQUARTZ srl as Associated Member. Consequently, for the time being ASSOCOMAPLAST Members are 162.
SAUDI PLASTICS & PETROCHEM 2014
21 February 2014
ICE-Italian Trade Agency, in cooperation with ASSOCOMAPLAST, has organized a small collective participation of n.10 Italian companies at SAUDI PLASTICS & PETROCHEM in Riyadh, just ended.
PLAST 2015 – Rubber is back
20 February 2014
Following its great success in 2012, RUBBER - the satellite-show for the rubber industry - will be staged again at PLAST 2015.
PLAST 2015 in progress
14 February 2014
Applications to PLAST 2015 increase more and more: some 50 exhibitors already applied in a few weeks booking a surface of more than 5,000 sqm. Exhibitors registered before May 15, 2014 will obtain discounts and free motive power, as indicated in the general regulation of the show. Any further information may be asked to PLAST 2015 organizer (email@example.com - tel +39 02 82283743).
Italian manufacturers in Moscow
30 January 2014
At the EXPOCENTR Fairgrounds the 17th edition of INTERPLASTICA is taking place, the main sectorial exhibition in Russia. More than fifty Italian companies are participating in the Italian pavilion coordinated by ASSOCOMAPLAST and some twenty Italian exhibitors are attending the stand of their local distributors.
Applications at PLAST 2015 now open
21 January 2014
Personal invitations via e-mail are sent in these days to companies potentially interested in exhibiting at PLAST 2015. Company details can be updated and exhibition space required on a dedicated section of the website, for sending further the application duly signed, together with the corresponding deposit.
9 January 2014
Within the initiatives of EUROMAP (Europe's Association for Plastics and Rubber Machinery Manufacturers) energy efficiency is a primary goal.
Seleziona una nazione
Corea del Sud
Emirati Arabi Uniti
Sort by most recent
Sort by oldest