info@amaplast.org   +39 02 8228371
  Versione Italiana

CEN TECHNICAL STANDARDS

The Technical Committee TC 145, within the European Committee for Standardization (CEN), deals with the standardization of safety requirements for plastics and rubber machines. We list here below the Working Groups that belong to TC 145, whose Presidency and Secretariat are managed by Amaplast since 1995, with with the updating of their activity.
For further information please contact Raffaella Fumagalli (e-mail: r.fumagalli@amaplast.org).

Injection moulding machines
WG 1 = EN ISO 20430:2020

The standard EN 201:2009 was published in the OJEU n. C 309 on 18.12.2009. 

The standard EN ISO 20430:2020 was published by CEN on 1.7.2020. 

 

Compression moulding machines and transfer moulding machines
WG 2 = EN 289:2014

The standard EN 289:2014 was published in the OJEU n. C 54 on 13.2.2015.
Given the systematic review closed on December 2, 2019 the standard was confirmed by CEN Members for five further years (Decision CEN/TC 145 5/2019). Germany, Italy and Switzerland voted in favour of a revision.   

Extruders and extrusion lines - Part 1: Extruders
WG 3 = EN 1114-1:2011

The standard EN 1114-1:2011 was published in the OJEU n. C 61 on 29.2.2012.
Review: 2021-09-06
A preliminary work item (ISO/PWI 22506) was created within ISO/TC 270 WG 2 for the study of an international standard on the safety requirements of extruders according to Vienna Agreement (ISO lead).

Extruders and extrusion lines - Part 2: Die face pelletisersWithdrawn
WG 3 = EN 1114-2:1998+A1:2008

The standard EN 1114-2:1998+A1:2008 was withdrawn on 7.5.2010, according to BT Resolution C36/2010, as some safety requirements were no longer up-to-date and there was a poor interest from the industry, users and manufacturers, in revising it.  

Extruders and extrusion lines - Part 3: Haul-offs
WG 3 = EN 1114-3:2019

The standard EN 1114-3:2019 was published in the OJEU n. L102 on 2.4.2020 with the Commission Implementing Decision (EU) 2020/480 of 1 April 2020. 

Two-roll mills
WG 4 = EN 1417:2014

The standard EN 1417:2014 was published in the OJEU n. C 14 on 15.01.2016.
The standard will be revised with the active participation of: France, Germany, Italy, Switzerland, the United Kingdom.
Convenor: Harry Reichert from DIN/NAM. 
Next WG 4 meeting is scheduled on June 14. 2021; afterwards the standard will be sent to first enquiry.


​

​

Blow moulding machines
WG 5 = EN 422:2009

The standard EN 422:2009 was published in the OJEU n. C 214 on 8.9.2009.

Given the systematic review closed on March 3, 2020 the standard was confirmed by CEN Members for five further years (Decision CEN/TC 145 1/2020).

Size reduction machines - Part 1: Blade granulators and Shredders
WG 6 = EN 12012-1:2018

The standard EN 12012-1:2018 was published in the OJEU n. L102 on 2.4.2020 with the Commission Implementing Decision (EU) 2020/480 of 1 April 2020. 

Size reduction machines - Part 2: Strand pelletizersWithdrawn
WG 6 = EN 12012-2:2001+A2:2008

The standard EN 12012-2:2001+A2:2008 was withdrawn on 4.6.2010, according to BT Resolution C41/2010, as some safety requirements are no longer up-to-date and there is a poor interest from the industry, users and manufacturers, in revising it.

Size reduction machines - Part 4: Agglomerators
WG 6 = EN 12012-4:2019/prA1

The standard EN 12012-4:2006+A1:2008 was published on the OJEU n. C 214 dell'8.9.2009. 
The standard EN 12012-4:20​19 was published by CEN on June 12, 2019.
On October 26, 2020 the Amendment of the standard started in order to have it published in the OJEU.​
The document will be sent to CEN enquiry on April 1, that will end on 24.6.2021.
Convenor: Claudio Celata from AMAPLAST-UNI.

Internal mixers
WG 7 = EN 12013:2018

The standard EN 12013:2018 was published in the OJEU n. L75 on 19.3.2019 with the Commission Implementing Decision (EU) 2019/436 of 18 March 2019. 

Calenders
WG 8 = EN 12301:2019

The standard EN 12301:2019 was published in the OJEU n. L72 on 3.3.2021 with the Commission Implementing Decision (EU) 2021/377 of 2 March 2021. 

Reaction moulding machines and plants
WG 9 = EN 1612:2019

The standard EN 1612:2019 was published in the OJEU n. L72 on 3.3.2021 with the Commission Implementing Decision (EU) 2021/377 of 2 March 2021. 


Apart from the standards and draft standards drawn up by CEN/TC 145 (type C), designers shall take into account the "horizontal" (type B) European harmonised standards, of which we attach an updated list.

Copyright © 2021 Promaplast srl. All rights reserved.  Privacy policy